• GTS NX
    Overview Geometry Modeler Mesh Generator Solver System Post-Processing
  • Events
  • Resources
    Blog MIDAS Expert Network Technical Support
  • Get Started
    GTS NX
  • Talk to us
Case Study Webinar Series Deep Excavation under Groundwater Table (Training Lecture by Dr. Cosimo Iasiello) 26 August 2020 (Wed.) 5PM (Sydney), 3PM (SG, KL), 8AM (UK) | Duration : 60 Min
Done
OVERVIEW

The design of retaining walls has traditionally been carried out using simplified methods of analysis (limit equilibrium, stress fields) or empirical approaches. However, such approaches cannot, and do not, provide all the desired design information. Numerical methods provide a viable alternative and have the advantage that they provide all of the desired design information in a consistent manner.

Design and construction of deep trenches below the water table is challenging, therefore deformation and drainage control should be designed using different computational approaches to assess the displacement of a given solution. In this webinar, we will analyze the different approaches to groundwater modeling in midas GTS NX.

 

Key points:

1. Groundwater Problems in Deep Excavations
2. Numerical Analysis vs Analytical Solutions
3. Define Water Pressures during an Excavation Process
4. Project Case Studies

SPEAKER
  • Dr. Cosimo Iasiello
    Deep Excavation under the Groundwater Table Tunnel & Geotechnical Team Leader AYESA, Spain
CONTENTS
01 Groundwater Problems in Deep Excavations

02 Numerical Analysis vs Analytical Solutions

03 Groundwater Control

04 Project Case Studies

Read all
The event is done.
Thank you for your interest.
You are registered.

Thanks for registration.
The registration confirmation email has been sent to your email

You are registered.

Thanks for registration.
Please check the confirmation email from GoToWebinar for joining the session.

WEBINAR GUIDE
  • Step 1 Register

    Register for the webinar by clicking on the link in the email invite. You'll receive a confirmation email with a unique link to join the session. Click "Add to calendar" to ensure you don't miss the webinar.

  • Step 2 Join

    At the time of the webinar, click the join link in the confirmation email or your calendar invite. Alernatively enter the 9-digit code into the box above. You can join from any Mac or Windows computer to join with our iOS or Android mobile apps.

  • Step 3 Watch & Learn

    If you arrive before the organizer, you'll see a window confirming that you successfully connected. Once the organizer arrives the Webinar will begin.